S2000Link S2000X
G4X Plug-In for the Honda S2000 AP1 and non E-Throttle 2005 AP2
- Part number
- 233-4000
- Application
- Honda S2000 AP1 (F20C)
- Availability
- Made to order
Added to cart · Go to cart
Ask about compatibility- Free insured shipping in Italy
- Card, PayPal, wallets and bank transfer
- E-invoice and 24 months
Description
The S2000X fits inside the factory enclosure and replaces the OEM ECU of the S2000 AP1, with no alteration to the wiring loom.
G4X Plug-In ECUs replace the factory ECU and fit inside the original enclosure, with no alteration to the vehicle wiring loom. All the features of a Link G4X wire-in ECU, with a direct-fit installation.
Important notes
- Before purchasing, check that your factory ECU connector matches the header shown in the photos.
- Manual transmission only.
- Does not support factory E-Throttle models.
- Most factory features are supported.
- 4-pin powered CAN connector: use the CANJST4 cable (Link PN 101-0198) to connect CAN devices. The old CANPCB cable is not compatible. The port also provides a protected 12 V supply with a 3 A self-resetting fuse.
Compatible applications
- Honda S2000 AP1 1999–2004
- Honda S2000 AP2 2005 (non E-Throttle)
G4X key features (where applicable)
- Up to 6D fuel and ignition mapping
- Precision closed loop cam control (four cam, independent control)
- Sequential fuel delivery
- Digital triggering, all OEM patterns
- OEM idle hardware supported
- 5D boost control with three switchable tables
- Motorsport features: antilag, launch, flat shift
- Continuous barometric correction (on board)
- CAN port
- QuickTune automated fuel tuning
- Individual cylinder correction
- USB tuning cable included
- Stats recording into on-board memory
- Gear compensations for spark, boost and fuel
- Real time selectable dual fuel, ignition and boost maps
- Sync and crank sensors can be a combination of Hall effect, variable reluctance or optical
- Boost control referenced to gear, speed or throttle position
- 512 MB data logging memory
- Staged injection
- Knock control with windowing
I/O expansion
Inputs and outputs available on the expansion connectors, as per Link documentation.
E-Throttle Connector
| E-Throttle 1 | Ground (Signal) |
| E-Throttle 2 | +5V Out |
| E-Throttle 3 | An Volt 10 |
| E-Throttle 4 | An Volt 9 |
| E-Throttle 5 | An Volt 8 |
| E-Throttle 6 | An Volt 7 |
| E-Throttle 7 | Aux 10 |
| E-Throttle 8 | Aux 9 |
Expansion Connector 1
| Expansion 1 - Ground (Signal) |
| Expansion 2 - Aux 11 |
| Expansion 3 - Aux 6 |
| Expansion 4 - DI 11 |
| Expansion 5 - DI 10 |
| Expansion 6 - DI 9 |
| Expansion 7 - DI 2 |
| Expansion 8 - DI 1 |
Expansion Connector 2
| Expansion 9 - Ground (Signal) |
| Expansion 10 - Aux 16 |
| Expansion 11 - Not Connected |
| Expansion 12 - Not Connected |
| Expansion 13 - Not Connected |
| Expansion 14 - Not Connected |
| Expansion 15 - An Volt 12 |
| | Expansion 16 - An Volt 6 | Price: 2064.65 € | |